Distributed Power Solution 240KW To 960KW

Innovative technology, leading the future

Ultra Low Power Consumption High-efficiency charging module. Extremely low standby power consumption (less than 1%), which can effectively reduce operating costs.
High Service Life Excellent electronic components, independent air ducts, and effectively extending the service life of the product.
Flexible Payment Methods Plug-and-charge, card swiping charging, VIN code charging, and code scanning charging are available.
Convenient For Installation and Maintenance The equipment layout in the cabinet is reasonable, convenient for maintenance and can be installed against the wall, and the operating temperature of the module is <60°C.
Complete Optional Functions Full power supply is intelligently distributed, the number of terminals is optional, 2-12 charging guns are also optional, and liquid-cooled super fast charging terminals can be added.

Model	GEVD-480F
Output power	Using 20KW charging module, the maximum output of total power from single machine is 240KW,
Using 30KW charging module, the maximum output of total power from single machine is 360KW, and use in N+1 parallel mode is available.
Using 40KW charging module, the maximum output of total power from single machine is 480KW, and use in N+1 parallel mode is available.
Input Voltage	AC400V±20%
AC Frequency Range	50/60HZ±10%
Output Voltage	DC200-750V/DC200-1000V
Output Ripple Coefficient	≤0.1%
Communication Interface	Ethernet and 2G/3G/4G are optional
Safety Regulation Protection	Insulation resistance ≤10MΩ, withstand voltage 2500VAC, protection level IP54
Safety and Compliance	IEC 61851-1; IEC 61851-23; IEC 61851-21-2; ISO 15118 Plug&Charge
Warranty	24 months, warranty extension possible
Current Stabilization Accuracy	≤±1%
Harmonic Distortion (THDi)	≥5%
Output Current	CCS2: Standard: 200A; Optional 300A (Nominal), 400A (Peak)<br>CHAdeMo: 125A or 200A
Voltage Stabilization Accuracy	≤0.5%
Reliability	MTBF ≥100,000 hours
Protection Functions	Overcurrent, overvoltage, undervoltage, integrated surge protection, PME (UK)
Operating Environment	Altitude ≤2000m (apply derating when exceeding this altitude), temperature -40~70°C, humidity below 95%